linea de procesamiento de carne de cordero

 

Linea de procesamiento de corderos, capacidad 200 corderos por hora.

Precio total 625.988,00 €

 
New Sheep / Lamb slaughter line / capacity: 200 sheep/hour
 
Listing:


Pos. Menge Beschreibung

A 1 Stall and passages

B div. Un-clean slaughter line

C div. Clean slaughter line

D div. Cooling rooms

E div. Sanitary parts

F div. Tripery sheep

G 1 Electric control

H div. Slaughtering equipment


Pos. Menge description Price EURO

A 1 stalls and passages
at the customer Civil work

B div. Un-clean slaughter line

B1 1 sheep stunning conveyor (Restrainer), Type: 07178000
execution:
the conveyor cosists of solidly build stainless steel construction. The conveyor belts are slat belts (synthetic material), arranged in V-shape. Because of this arragengement the sheep are transported and cannot touch the floor anymore. The slats are moved by conveyor chain upside and down. Each belt has its separate drive.
Capacity:
Technical information:
Length: B = 3500 mm
Two drives with SEW gear motors 400 V, 50 Hz
Electric controlling

B 2 1 Bleeding table Type: K013.02.015(stainless steel)
L=1000 , B= 1100 mm (grid of pipes), H= 900 mm
complete stainless steel (variable in high)
with border and four props

B3 div. Contruction and fixing material

Price (stunning) Pos. B1-B3 54.000,00

B3 1 bleeding elevator, Type: K013.02.020
For slanting lift of the stunned sheep at the bleeding line. High: 2500 mm.
Consisting of drive and voltage station, conveyor chain with taking and leading rolls, conveyor truss (side) with welded consoles and railway 2“.
execution: steel galvanized
transport elements to use: bleeding slide frame.
high : 2,50 m
capacity : 500 pieces/h
permissible loading : 400 kg
angle of gradient : 60 Grad
drive : SEW gear motor
400 V, 50 Hz,1,5 kW, with break
control voltage : 42 V
motor cover : IP 44
crodicle clamp cover : IP 65

B4 1 Bleeding conveyor for sheep, Type: 04683000
The conveyor consists of:
Conveyor truss (U-profile) with railway (2“) and carriyng and hanging contruction, all galvanized steel. All steering wheels as well as the driving chain rail are made of reinforst special synthetic material (blue).
30 m sticking chain with leading rolls and taking. All steering wheels as well as the driving chain rail are made of reinforst special synthetic material (blue).
Technical information:
1x drive station SEW gear motor, with frequency regulation
1x pneumatic raising,
1x Hydro – pneumatic tension,
2x steering station
1x30 m sticking chain,
One piece conveyor truss as inspection part, carrying and hanging contruction for the conveyor (galvanized steel)

B5 1 Bleed collecting tub, Type: K011.02.5.001m
Stalled at the building site

B5.1 2 Drains for blood and water Type: K011.02.5.001 (stainless steel)

B5.2 2 Stoppers for blood and water, Type: K011.02.5.00 (stainless steel)

B6 5m Sheep bleeding hooks railway, Type: K011.02.044m
This railway system will be delivered of 2“, t = 4 pipes, beams, consoles, hanging to the ceiling and railway archs. Complete stainless steel.
Commentary:
This railway system can be automised later on without any difficulties.
Price (bleeding line) Pos. B3-B6 43.824,00 €

B7 1 Hanging system, sheep&lambs, Type: K011.02.044
Bleeding chains on hooks with pneumatic railway part.
consisting of:
div. mechanic and static components (galvanized steel)
1 pneum.- zylindre incl. Pneumatic ventile,
Complete with RB-connection

B8 1 Dehiding conveyor, Type: 04683000
This conveyor consists of:
Conveyor truss (U-profile) with railway (2“) and carryng and hanging construction, completely galvanized steel. All steering wheels as well as the driving chain rail are made of reinforst special synthetic material (blue).
36 m sticking chain with leading rolls and taking wagons, driving station with SEW gear motor with frequency regulation and synchronisation part
pneumatic tension,
four steering stations,
1x 36 m sticking chain,
one piece conveyor truss as inspection part,
with connection to cooling rooms
carrying and hanging contruction for the slaughtering conveyor (galvanized steel)
Price Pos. B7-B8 44.976,00 €

B9 4 platform (stainless steel), Type: 01429000
These platforms are fixed on the ground. The part for staying is made of Kieserling.
Techncal information:
length: 2000 mm
width: 1000 mm
high: adopted to the conveyor (variable in high)

B10 1 Dehider for sheep, Type: 07172000
This dehider is constructed for high capacity and is used in the slaughtering process.
During dehiding the forefeet are hold and brought to tension automatically. Because of the fixing of the forefeet an easy dehiding is guaranteed. Dehiding will be done up to down.
Because of his small seize the dehider can be easily installed in cramped rooms. Two strong leading pillars are the centre of the dehider. At the upper end of the leading pillars an electric drive with a rounding chain is installed. The drive is controlled by a switch (forward and backward). Two dehiding chains are fixes by a ring in the middle of the rounding chain. These chains are fixed on the skin of the dehided beast (similar to bleeding chains). After dehiding when there is less force at the dehiding chains the skin can be slipped off easily. The forefeet will be removed automatically. By switch the chain goes back to the start position.
Technical information:
material: stainless steel (except electric drive and rolls) electric drive (SEW): 220/400 V; 50 Hz, (3-Phase-connection)
seize:
length:ca. 1580 mm
width:ca. 1500 mm

B11 1 Head rinse cabinet (stainless steel)
complete with nose rinse (for cattle and sheep)

B12 1 Dropping funnel skin, (stainless steel)

B13 div. Contruction and fixing material
Price Pos. B9-B13 50.976,00 €

C div. Clean slaughter line

C1 1 Slaughtering conveyor for sheep, Type: 04683000 m
This conveyor consists of:
Conveyor truss (U-profile) with railway (2“) and carrying and hanging construction, all galvanized steel. All steering wheels as well as the driving chain rail are made of reinforst special synthetic material (blue).
36 m sticking chain with leading rolls and taking wagons
All steering wheels as well as the driving chain rail are made of reinforst special synthetic material (blue).
Technical information:
1x drive station with SEW gear motor, with frequency regulation
1x pneumatic lifting,
1x Hydro – pneumatic tension,
1x steering station
1x36 m sticking chain,
24x head hooks, (stainless steel)
24x hanging for organs, (stainless steel)
24x organ hooks, (stainless steel)
1x rinse cabin for hooks and hanging
1x dropping station, (stainless steel)
1x gut funnel,(stainless steel)
one piece conveyor truss as inspection part
carrying and hanging construction for the conveyor (galvanized steel).

C2 5 platform (stainless steel), Type: 01429000
These platforms are fixed on the ground. The part for staying is made of Kieserling.
Techncal information:
Length: 2000 mm
Width: 1000 mm
High: adopted to the slaughter belt (variable in high)

Price Pos. C1-C2 74.736,00 €

C3 5m Railway system, Type: 00399000mm
This railway system will be delivered of 2“, t = 4 pipes, beams, consoles, hanging to the ceiling and railway archs. Complete stainless steel.
Commentary:
This railway system can be automised later on without any difficulties.

C4 2 Hand pushing points, handling by winch, Type: 00374000
These points are equally to the pneumatic pushing points. They can be changed to automatic handling easily.
Consisting of:
div. mechanic and static components (galvanized steel)

C5 div. Construction and fixing material
Price Pos. C3-C5 2.412,00 €

C6 1 Weighing and carrying conveyor, Type: 04683000 (cattle-sheep)
This conveyor consists of:
Conveyor truss (U-profile) with railway (2“) and carrying and hanging construction, all galvanized steel. All steering wheels as well as the driving chain rail are made of reinforst special synthetic material (blue).
35 m sticking chain with leading rolls and taking wagons
Drive station with SEW gear motor with frequency regulation and sychronisation part
1x Hydro – pneumatic tension,
4x steering stations,
1x 35 m sticking chain,
one piece conveyor truss as inspection part,
with connections to cooling rooms
carrying and hanging construction for the slaughtering conveyor (galvanized steel).
Price Pos. C6 41.664,00 €

C7 1 Scale sheep, Type:K04910010
Weighing bridge:
Weighing conveyor* bringing in of force by ball supports in 2 DMS weighing lines IP 65 made of corrosion prevented steel alloy
Surface cover: stainless steel
Wire to the indication display: 10 m with sticking connection
Length of weighing edge: 628 mm
Weighing capacity: 0 – 300,0 kg
Official capacity: 2,0 – 300,0 kg

C7.1 1 Indication display- sheep , Type: Typ:K054.10.024
Evaluation part:
LED-display, green, 6 numbers, high:20 mm
6 keys with film cover
Showing of net and gros weight or sum * Minus information for Plus-/Minus- and taking out * Tara -balance 100 % (subtraktiv), manual or automatic * gros- and Tara -retrievable * one key counting function
Interface 1 – RS232/V24: 150 = 19.200 Bit/s
interface 2 – RS232/V24: 2400 = 115.200 Bit/s
case usable as table or wall instrument * corrossion free, of CNS 1.4301
seize: L x B x H 240 x 180 x 37 mm
cover IP 65 * cover of tension according to VDE
net connection 230 V * mains receiver with 10 m cable
case IP 66

C7.2 1 Pneum.- pushing pole conveyor, Type: K013.02.7.001m
Length: 2 m
drive: Pneumatic zylindre
consisting of:
div. mechanic and static components (galvanizes steel)
inkl. Railway and controlling elements
Price Pos. C7 9.468,00 €

C8 div. Railways and points in the slaughtering hall

C8.1 9 Pneum. Railway pushing point Type:0072930 m,
2x slaughtering conveyors
7x weighing and transport conveyor
pneumatic control – automatic
consisting of:
div. mechanic and static components (stainless steel)
1 Pneum.- zylindre incl. Pneumatic ventile,
complete with RB connections
1.056,00 € 9.504,00 €

C8.2 80 m Railway system, galvanized steel, Type: 00399000
This railway made of 2“ pipe will be delivered with beams (I-160), consoles, hanging to the ceiling and railway archs, complete galvanized steel.
Commentary:
This railway system can be automised later on without any difficulties
120€/m 9.600,00 €

C8.3 3 Hand pushing points, handling by winch, Type: 00374000
These points are equally to the pneumatic pushing points. They can be changed to automatic handling easily.
Consisting of:
div. mechanic and static components (galvanized steel)
432,00 € 1.296,00 €

C8.4 3 Railway cross point, Type: 000010000 m
Handling by hand
Consisting of:
div. mechanic and static components (galvanized steel)
2500,00 € 7.500,00 €

Price C8 27.900,00

D div. Cooling rooms sheep

D1 1 BU – cooling room

D1.1 30m Railway system, Type: 00399000mm (BU)
This railway made of 2“ t=4 pipe will be delivered with beams, consoles, hanging to the ceiling and railway archs, complete galvanized steel.
Commentary:
This railway system can be automised later on without any difficulties
120,00 €/m 3.600,00 €

D1.2 8 Hand pushing points, handling by winch, Type: 00374000
These points are equally to the pneumatic pushing points. They can be changed to automatic handling easily.
Consisting of:
div. mechanic and static components (galvanized steel)
432,00 € 3.456,00 €
Preis Pos. D1 5.880,00 €

D2 1 Cooling room –sheep for 2 cooling rooms

D2.1 300m Railway, Type: 00399000mm (BU)
This railway made of 2“ t=4 pipe will be delivered with beams, consoles, hanging to the ceiling and railway archs, complete galvanized steel.
Commentary:
This railway system can be automised later on without any difficulties
126,00 €/m 37.800,00 €

D2.2 24 Hand pushing points, handling by winch, Type: 00374000
These points are equally to the pneumatic pushing points. They can be changed to automatic handling easily.
Consisting of:
div. mechanic and static components (galvanized steel)
432,00 € 10.368,00 €

D2.3 div. Commission railways – dispatch
Watch: sheep slaughter line
Price D2 48.168,00
E div. Sanitary parts

E1 6 Knife sterilisation bassin Type: 01177200
These bassins are completely made of stainless steel. They cosist of a double sprayer funtion fort wo knives. Sterilisation will be done by double sprayer function with water of 82°C. This hot water has to be brought in by a pipe from outside. The basins can be fixed at the hand washer or at the railings of the slaughtering platforms. The drainage will be linked down.
Seize: 360 x 130 mm
Advantages: no water inside the bassin – very low vaporization, no standing water inside the bassin, low use of energy
Spraying= hot water 82° with sensor.

E2 6 Apron and hand washing cabinets, Type: 09337500 (stainless steel)
Manual handling.
These cabinets have a shower for aprons.
The hand washing shower is fixed beside the shower. The place for staying on consists of a synthetic material made gut. The cabinets are completely made of stainless steel.
Technical information:
seize (L x B x H): 1200 x 600 x 2000 mm
water connection ½“
water drainage: Ø 40 mm

E3 6 Towel dispenser

E4 6 Paper bins

E5 6 Soap dispenser

Price Pos. E1-E5 18.072,00 €

E6 div. Sanitary article hygienic double door system (option)

1 2 Hand brush, Type: K022.01.000
To wash aprons and boots manual, with hand lever ventile, 1,5 m, connection hose and ball tap

2 1 Apron wardrobe, incl. apron splay hangers, Type: K022.02
for hanging the aprons in splayed situation.
capacity: 13 splay hangers

3 1 Sole cleaner, Type:05362920
with 23 Litre arrangement
Technical information:
Electr.-connection: 380 V
Water connection: ½“
Water drainage: Ø 75
Länge: 1500 mm; Breite: 850 mm

4 1 Wall fixing, Typ: K022.01.003
for the knife holder made of stainless steel, Length 1202 mm
capacity: 12 knife holder

5 3 Changing shelves for boots, Type: K022.01.004
For wall fixing, bar modell, for 15 pair
3 pair of boots/m
15 pair of boots = 5 m

6 12 Knife holder, Type: K022.01.005
incl. blade cover and fixing

7 1 Cleaning cahnnel, Type: K022.01.006
Stainless steel, 24 V sensor controlling, sensor in system, incl. fixing channel, with termal mix ventile ½“ and soap dispenser for two wash stations

8 1 Paper roll dispenser incl. paperbin, Type: K022.01.007
With wall or basin fixing and paper bin of stainless steel material

9 1 Apron and boot washing station, Type: 03324002
Technical information:
seize (L x B x H): 1200 x 600 x 2000 mm
water connection½“
connection for brushes: 2 x ½“
water drainage: Ø 40 mm

10 1 Knife holding basket, Type: TEK 03561000
Complete stainless steel, to push in 4 knifeholders
(Pos. 8).

11 1 Washing mashine for knives and gloves Type: 03561800
Technical information:
capacity: 15 – 50 cabins (depends on the programm)
width: 660 mm
depths: 700 mm
high of teh door: 520 mm
high: 2100 mm (aufgeklappt)
pump capacity: 1,1 kW
heating capacity tank: 2,7 kW
heating capacity boiler: 13,1 kW
(they both cannot be switched on together)
Content of the tank: 50 Liter
Boiler: 3,5 Liter
Water connection: 15 mm, 3 bar, 20 l fresh water/min.
Drainage connection

 

 

prices - listing for sanitary hygienic double door system (Option)


Pos. Menge description Preis

1 2 Hand brush 390,00 €

2 1 Apron wardrobe incl. apron splay hangers 480,00 €

3 1 Sole cleaner 10.278,00 €

4 12 Wall fixing for knife holders 1.740,00 €

5 3 Changing shelve for boots 300,00 €

6 12 Knife holder 1.800,00 €

7 1 Cleaning channel 2.220,00 €

8 1 Paper roll dispenser incl. paperbin 264,00 €

9 1 Apron and boot washing station 1.920,00 €

10 1 Knife holder basket 570,00 €

11 1 Washing mashine for knives and gloves 10.040,00 €


F div. Bowl working station

F-1 1 Centrifuge, Type: 10472000-T
Technical information:
diameter: Ø 1000
total width: 1250 mm
total high: 1300 mm
revolutions per minute: adjustable
connection for hot and cold water, incl. stopping ventiles

F-2 1 Electric control for centrifuge, Type: 10472000-T
The control element will be delivered in a switch box, made of stainless steel.

F.3 1 Bowl table, Type: K 00431000m, (stainless steel)
L= 2000 mm, B= 1000 mm
Adjustable in high+/- 50mm

Price Pos. F 29.280,00 €

G 1 Electric control station and drive (Siemens Type: S7 )
Consisting of:
Switch box with display The box is ready to connect fort he whole plant.
Connection tension: 3 x 400 V/50 Hz.
Type of covering: IP 65
Surrounding temperature: 0 – 45° C
regulations: VDE
drive tension: 24 VDC

Price Pos. G 23.400,00 €

H div. Slaughtering equipment

H1 40 Sheepbleeding hooks, Type: K013.02.100
The bleeding hooks consist of a hook part as slide hanger.
The sheep bleeding hooks are delivered completely with chain.

H2 1000 Euro – Aluminium – Roll hooks

H3 4 Hook waggon
Complete stainless steel
38.160,00
H4 10 Economy shower 2.100,00
H5 1 Splitting saw incl. Sterilizer and 20 sawblades 12.800,00
H6 1 Blood collection (Tank, pumps, etc. Cattle & Sheep 65.000,00

Price H 118.060,00€

prices - total listing

Pos. Menge Description Preis

A 1 Stalls and passages Civil work

B div. Un-clean slaughter line 193.776,00 €

C div. Clean slaughter line 156.180,00 €

D div. Cooling rooms 85.520,00 €

E div. Sanitary parts Price without optionen 18.072,00 €

F div. Bowl working 29.880,00 €

G 1 Electric control 24.500,00 €

H div. Slaughtering equipment 118.060,00 €

Total price from factory EXW (Germany),including mounting
excludingV.A.T. 625.988,00 €
 

 
 
Regreso a negocios de maquinaria europea en latinindustry.biz
 
Regreso a negocios en america latina importacion exportacion mantillaexport.com
 
Forma parte de nuesta red de negocios entre America Latina y Europa tolimared.com
 
Bienvenidos sus propuestas de negocio - aproveche la globalizacion - mejora sus fuentes - mejora su alcance - contacte nos en info@tolimared.com